Haltech for Nissan Skyline R34

Features: 
• Direct plug and play replacement of the OEM ECU, no re-wiring necessary. 
• Uses the cars factory sensors 
• Supports Sequential Injection (peak and hold) and Direct fire ignition 
• Windows 2000, XP, Vista, Windows 7 compatible software 
• Real time programming, instant hesitation free adjustment while engine is running 
• Fully user definable 32 x 32 mapping 
• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF) 
• Diagnostic trouble code storing & Check engine light control 
(Access through laptop only ) 

• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost) 
• Wideband “auto tuning” using user definable target AFR table 
• USB and CAN Communication Port 

Factory Outputs: 
• 6 x Fuel Injector outputs 
• 6 x Ignition outputs 
• Tacho, Boost Control, AC Clutch Relay, Idle Control 
• Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed) 

Factory Inputs: 
• MAF sensors, Throttle Position Sensor, Oxygen sensors, 
• Coolant Temperature sensor, Vehicle Speed Sensor, 
• Air Temperature sensor 

Expansion I/O*: 
• 2 x Analogue Voltage inputs 
• 2 x Analogue Temperature inputs 
• 4 x Digital pulsed outputs 

*Optional auxiliary harness required to be purchased Haltech Part # HT040003 

Functions: 
• Closed Loop O2 Control 
• Decel Cut Over Boost Rev Limiter 
• Closed & Open Loop Boost Control 
• Gear Setup 
• ACF On Base Tables 
• Transient Throttle Enhance 

Correction Tables: Fuel Ignition Boost: 
• Cranking 
• Air Temp Target Correction 
• Zero Throttle Gear Correction 
• Cylinder Trim 
• TPS Correction 
• Generic Correction 1 
• Generic Correction 2 
• Gear Correction 
• Post Start 
• Air Temp Duty Correction 
• Post Start 

Miscellaneous: 
• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 
6 channels of data 
• Max 20 channels logging capability 
• Tune can be password protected in software 
• Rugged anodized aluminum casing 

Power Requirements: 
Source: 8.6 to 16.5 Volts DC 
Consumption: 530mA at 12Volts DC 

Physical Dimensions: 
ECU Dimensions Length: 154mm (174mm with MAP nipple) 
Width: 158mm Height: 42mm Weight: 680g (1.5 lb) 

Applications: Nissan Skyline R34 GT-R Engine Codes: RB26DETT Transmission: Manual only 
(Automatic not supported) 

The Kit includes: 
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)